Placement Deployment Guide | Kamiwaza Docs

Version: 1.0.1 (Latest)

Placement is automatic — deploying a model with placement is the same deploy flow you already use. This guide shows how to deploy multiple models onto shared GPUs, read where each deployment landed, and troubleshoot placement problems.

For background on how placement decides, read the Model Placement Overview and Fractional GPU Serving.

Before you start

• A model downloaded and ready to deploy. See Downloading Models.
• A rough sense of the model's memory footprint versus your hardware. The UI shows VRAM guidance per variant; the SDK exposes estimate_model_vram.
• On a managed cluster: the NVIDIA or AMD GPU Operator installed by your cluster admin. If no sharing strategy is configured, deployments still work but density is limited to one model per GPU (see SharingNotConfigured below).

Deploy a model in the UI

1. Navigate to the Models page and select the model.
2. Click Deploy. In Novice Mode, Kamiwaza picks a platform-appropriate variant with sensible defaults; in Advanced Mode you can select the engine and parameters yourself. See the GUI Walkthrough.
3. Kamiwaza estimates the model's footprint, picks a GPU (or memory pool) with enough free budget, and starts the deployment. No placement input is required.
4. Watch the status move through DEPLOYING and INITIALIZING to DEPLOYED. The statuses are described in Model Deployment.

To run a second model on the same hardware, just deploy it the same way. If the combined budgets fit, both models run side by side; if not, the second deployment fails fast with a NoFit error.

Deploy a model with the SDK

from kamiwaza_sdk import KamiwazaClient

client = KamiwazaClient(base_url="https://<your-host>/api")

deployment_id = client.serving.deploy_model(model_id=model_id)

deployment_id = client.serving.deploy_model(
    repo_id="Qwen/Qwen3-8B",
    m_config_id=config_id,
)

status = client.serving.get_deployment_status(deployment_id)

The deploy API is asynchronous: the server accepts the request and returns the deployment ID immediately. By default the SDK blocks client-side (wait=True), polling until the deployment reaches DEPLOYED; it raises DeploymentFailedError if the deployment reaches a terminal failure state (FAILED, ERROR, or MUST_REDOWNLOAD) and TimeoutError if the deployment is not ready within timeout_seconds. Pass wait=False to get the deployment ID back as soon as the server accepts the request, then observe progress with get_deployment_status or `wait_deployment_ready.

A model that cannot be placed fails fast with the no-fit reason recorded on the deployment (last_error_code, last_error_message) — see What a NoFit error means.

Monitor placement

Open a deployment's details to see where it landed:

Verify

1. Confirm each deployment shows DEPLOYED in the UI.
2. Send a short test prompt to each deployment's endpoint (shown in the UI).
3. If you deployed multiple models to one GPU, confirm both respond — they are serving concurrently from the same card.

Troubleshooting

The deployment fails immediately with a placement (NoFit) error

This is placement telling you the model does not fit anywhere, before any pod starts. The deployment shows FAILED with last_error_code set to NoFitError and the no-fit reason in last_error_message (the SDK raises DeploymentFailedError when waiting). The NoFit reference table lists every reason with common causes and fixes. The quick version:

• insufficient_capacity / insufficient_system_memory — pick a smaller or more quantized variant, reduce context length, or stop an unused deployment to free budget.
• vendor_mismatch / accel_version_unmet — the engine does not match your hardware or driver generation; pick a matching variant.
• insufficient_gpu_count — lower the tensor-parallel size or free GPUs on a multi-GPU node.
• sharing_not_configured — ask your cluster admin to enable GPU sharing.

A SharingNotConfigured notice appears

On a managed cluster where the GPU Operator is installed but no sharing strategy is configured, deployments succeed as whole-GPU and carry a SharingNotConfigured notice. This is informational: density is limited to one model per GPU until your cluster admin enables a sharing strategy (such as time-slicing or MIG). The notice clears on its own once sharing is configured.

The deployment reaches ERROR or FAILED after placement

Placement succeeded, but the model failed at runtime. The deployment record carries three fields that tell you what happened:

• last_error_code — a short classifier such as OOM, CUDA_ERROR, MODEL_LOADING_FAILURE, CONTAINER_EXITED, or STARTUP_TIMEOUT. The full code list with actions is in Model Deployment.
• last_error_message — the explanation behind the code: the actual error text captured from the engine or runtime (for example, the CUDA out-of-memory message, or the reason the model files failed to load). Read this first — it usually names the exact resource or file involved, which tells you whether to resize, re-download, or check logs.
• last_error_at — when the error was recorded, so you can tell a stale error from a current one.

A note on OOM after a successful placement: budgets are reservations, not real-time meters. If something outside Kamiwaza consumed GPU or host memory after scheduling, the engine can still run out at load time — see Limits to know. Free memory on the host or reduce the model's footprint, then retry.

The deployment sits in INITIALIZING

Normal for a short period: routing is up but the model is still loading. Large models on unified-memory machines can take a while on first load. If it persists well beyond the expected load time, check last_error_code for STARTUP_TIMEOUT and see the general troubleshooting guide.

Checking capacity on a standalone cluster

On a standalone cluster you can inspect what placement sees:

# GPU labels detected on a node

kubectl get node <node-name> -o jsonpath='{.metadata.labels}' | tr ',' '\n' | grep gpu

# Per-GPU memory budgets advertised on a node (GB)

kubectl get node <node-name> -o jsonpath='{.status.allocatable}' | tr ',' '\n' | grep vram-gb-gpu

If a node shows no kamiwaza.ai/gpu-* labels, hardware detection has not labeled it and it will not receive placements.